Bent Trimmers
The offset handles of this pattern facilitate cutting material on flat surfaces.  This is the standard shear pattern of the garment and many other industries.  Available with either Knife Edge "KE" grind or standard "S" scissor grind.  The Knife Edge grind is an approximately forty-five degree angle and is honed to a very sharp edge.  To order standard grind, substitute "S" for "KE" in the model number.  Available with safety rounded points at slightly higher price.  All have an adjustable pivot with locking nut to hold adjustment and are double plated chrome over nickel which produces no glare and a corrosion resistant finish.  Made in USA.
 
Model Size Length of Cut Weight per Dozen
171KE-6 6" (152mm) 2.625" (67mm) 2.8 lb (1.27 kg)
171S-6 6" (152mm) 2.625" (67mm) 2.8 lb (1.27 kg)
171KE-7 7" (178mm) 3.25" (83mm) 3.5 lb (1.60 kg)
171S-7 7" (178mm) 3.25" (83mm) 3.5 lb (1.60 kg)
171LHKE7.5 7.5" (191mm) 3.625" (92mm) 3.75 lb (1.70 kg)
171LHS-7.5 7.5" (191mm) 3.625" (92mm) 3.75 lb (1.70 kg)
171KE-8 8" (203mm) 3.875" (98mm) 5 lb (2.27 kg)
171S-8 8" (203mm) 3.875" (98mm) 5 lb (2.27 kg)
171LHKE-8 8" (203mm) 4" (102mm) 5 lb (2.27 kg)
171LHS-8 8" (203mm) 4" (102mm) 5 lb (2.27 kg)
171KE-9 9" (229mm) 4.375" (111mm) 6.5 lb (2.95 kg)
171S-9 9" (229mm) 4.375" (111mm) 6.5 lb (2.95 kg)
171KE-10 10" (254mm) 4.75" (121mm) 7.5 lb (3.40 kg)
171S-10 10" (254mm) 4.75" (121mm) 7.5 lb (3.40 kg)

Home Page | About Gold Seal® | Catalog Index | Contact


Copyright 1999-2009 Southern Supply & Manufacturing Company, Inc.
PO Box 10066, St. Petersburg, FL 33733, (727) 327-0757